The new Ultimaker S3 delivers high-quality, composite-ready performance – all efficiently from your desktop. Packed with our latest technology, it is as easy to use as it is powerful, offering the most cost-effective way for disruptive businesses to adopt in-house 3D printing.

 

 

 

ULTIMAKER S3

Massive performance, impressively small footprint

Main Features

​Swappable print cores:

 

Faster print core changes mean higher uptime and easier maintenance. Your Ultimaker S3 comes with 2 x print cores (AA) for build materials, and 1 x print core (BB) for support materials. There’s a customized nozzle geometry per material – ensuring lower clogging risks and a more reliable 3D printing experience

 

LED status indicators:

Print core LED lights ensure an optimised 3D printing experience by alerting if any user interaction is needed

Enhanced reliability: 

 

Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do your sprint core LED lights to ensure an optimized 3D printing experience by alerting if any user interaction is needed

Bigger build volume:

 

A build volume of 230 x 190 x 200 mm (9 x 7.4 x 7.9 inches) gives even more freedom to realize your designs or print multiple parts in one go, so you can meet demand with maximum efficiency while fitting comfortably on your deskint core LED lights to ensure an optimized 3D printing experience by alerting if any user interaction is needed

Fast setup, high uptime:

 

With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints

 

Easy touch control:

 

​A 4.7-inch (11.9 cm) touch display makes operating the 3D printer effortless, displaying visual guides to explain configuration changes and maintenance, plus a visual preview of your print

Designed to connect:

The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera

g

Superior 3D Printing Experience

Optimised Cura material profiles 

 

Trusted by 2 million users, Ultimaker Cura prepares your model for printing and features integration with industry-standard CAD software.

Material to suit your needs

 

Our range of materials is extensively tested by our engineers to give the best results with Ultimaker 3D printers and software

Dedicated support network 

 

Our 3D printers come with a 12-month warranty and lifetime technical support – wherever you are, whenever you need it

Simple Controls and Connectivity

  • USB port

  •  

  • Enjoy standalone printing using a USB stick (16GB included)

  • Live camera

  •  

  • Monitor every stage of your 3D printing project remotely by simply connecting to your Ultimaker 3’s Wi-Fi network. The result? Optimised workflow and exceptional control

  • Wi-Fi / LAN

  •  

  • Send your print project quickly and easily to your Ultimaker S3 via Cura

Active leveling 

 

The capacitive sensor in the print head measures distances between the print bed and the nozzle, and the tilt angle is compensated by adjusting the z height in the first layers. The result? More accurate leveling and improved build plate adhesion

 

New refined design 

 

The Ultimaker S3 features a build plate that’s lighter and stiffer, which reduces vibrations and helps produce an unrivaled print quality. The removable glass plate makes it easy to access your prints

  •  

​Heated build plate

 

Thanks to the heated glass build plate, you can print using many different materials and with improved build plate adhesion

 

Feeder

 

Dual geared feeders: Geared feeders exert more force on the filament, and also eliminate heat exposure from the motor. Change your 3D printing materials with ease, select the correct pressure with a push on a button, and use the lever function to manually insert or remove a filament. More control means more successful, reliable and durable 3D print results, without compromise

Heated Build Plate

Industrial Grade Materials

 

 

​Ultimaker materials 

 

Print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA – with material portfolio due to be expanded with CPE+, PC and TPU 95A in the future. Combine two build materials for dual-colour 3D prints or achieve state-of-the-art complexity with build and water-soluble support material combinations (Nylon/PVA and PLA/PVA)

 

​NFC material scanner 

 

Your Ultimaker 3 identifies the material that is being loaded and checks the correspondence of the filament and print core type you are using. Coupled with our extensively tested preconfigured material profiles in Cura, the Ultimaker 3’s material recognition system ensures your 3D printer is set for the highest-quality results

​Open filament system

 

With our integrated ecosystem of reliable hardware, extensively tested materials and cutting-edge software, you are guaranteed the highest level results and optimised 3D printing experience. Yet, thanks to the Ultimaker open filament system, you have the freedom to try and test other types of existing filaments or manufacture your custom solution that would match your specific requirements

Ultimaker S3

Massive performance, impressively small footprint

Specifications / Features( Download SpecSheet ) Technology:

Fused Filament FabricationPrint head

Dual nozzle, with a lifting mechanism on 2nd nozzle. (Easily swappable print cores)

Build volume

Left or right nozzle, or dual extrusion : 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)

Dimensions with bowden tube and spool holder : 495 x 585 x 780 mm (19.5 x 23 x 30.7 inches)

 

Weight : 14.4 kg (31.7 lbs)

Assembly type : Pre-assembled

Filament diameter: 2.85 mm

Layer resolution

0.25 mm nozzle: 150 - 60 micron

0.4 mm nozzle: 200 - 20 micron

0.6 mm nozzle: 300 - 20 micron

0.8 mm nozzle: 600 - 20 micron

Build Plate

Heated glass build plate
 

Heated aluminum build plate (available fall 2018)

Build plate leveling: Active leveling

Build plate heat up time: < 4 min (from 20 to 60 °C)

Print head

Dual-extrusion print head with an auto-nozzle lifting system and swappable print cores

Print core replacement : Swappable print cores

Build speed : < 24 mm³ /s

Feeder type : Dual geared feeder optimized for composite materials

XYZ resolution : 6.9, 6.9, 2.5 micron

Nozzle diameter : 0.25 mm, 0.4 mm, 0.8 mm

 

Nozzle temperature : 180 - 280 °C

Nozzle heat up time : < 2 minutes

Operating sound : 50 dBA

Display : 4.7-inch (11.9 cm) color touchscreen

Materials

System : Open filament system

Filament diameter : 2.85 mm

Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway and Also

 

                                   supports third-party materials

Software and Connectivity

Supplied free software : Ultimaker Cura – print preparation software
                                       Cura Connect – printer management solution

 

Supported OS: Windows, Mac, Linux

 

File types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG

 

File transfer: Print direct from Cura via network/ Stand alone printing via USB-drive

The Print Head

Dual extrusion: Combine build and water-soluble support materials to create complex mechanical parts and

 

                         intricate surfaces or choose to print with two colours. Ultimaker S5’s unique auto nozzle-lifting

 

                         system ensures a smooth, professional finish with every print.

Further Information

Ultimaker S5 User Manual

 

General Product Safety and Compliance Information

Warranty12 Months**Print cores are consumable parts that will wear over time and are not covered under warranty. The frequency of replacement required for the print cores depends on the amount of usage and the types of filament used. Please kindly contact us if you require more information.

**CAUTION, THIS PRODUCT CONTAINS PARTS AND ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). ACCESSING THE PROTECTED ELECTRONICS MAY VOID YOUR WARRANTY**

3D Printer
Material
Company

Connect With US

All Right Reserved 2020. Pebblereka.

  • Facebook
  • Twitter
  • YouTube
  • Instagram