ULTIMAKER 3 

EXTENDED

Delivering accuracy

and consistency

The Ultimaker 3 Extended shares all the excellent features of the Ultimaker 3, and has an even bigger build volume. It is the newest and most advanced large-format 3D printer created by Ultimaker. It features sophisticated dual extrusion technology and advanced print head design that make it the most reliable dual extrusion 3D printer available.

 

With its unique auto-nozzle lifting system, professional build and support material combinations, and swappable print cores, users can now achieve complex designs and improved 3D print performance that was previously only available through high-cost industrial rapid prototyping machines. Its powerful dual extrusion technology with dissolvable support enables designers, engineers, and manufacturers to create complex geometries and achieve remarkable design intricacy with ease.

 

 Ultimaker's focus on making 3D printing as user-friendly as possible has resulted in seamless hardware, software and material integration that enables simple and efficient workflow, as well as maximum machine uptime. Ultimaker 3 is setting the new benchmark for professional desktop 3D printing once again and is making professional 3D printing accessible to everyone.

Main Features

​Swappable print cores:

 

 

​Faster print core changes mean higher uptime and easier maintenance. Your Ultimaker 3 comes with 2 x print cores (AA) for build materials, and 1 x print core (BB) for support materials. There’s a customized nozzle geometry per material – ensuring lower clogging risks and a more reliable 3D printing experience

 

LED status indicators:

Print core LED lights ensure an optimised 3D printing experience by alerting if any user interaction is needed

New optimized cooling:

 

Ultimaker 3 has a powerful, low-noise fan system. Featuring two new radial fans and fan shrouds, it creates greater pressure build-up for improved airflow. This ensures better cooling, high-quality bridging, faster print runs, and smooth print surfaces.

Superior 3D Printing Experience

Optimised Cura material profiles 

 

 

Extensively tested preconfigured Cura profiles make for a smoother, more seamless 3D printing experience by automatically adjusting the necessary settings for each material and print core. Produce consistent, quality results with every print

Material recognition with NFC scanner 

 

Built-in material recognition system ensures your 3D printer is primed and ready for the task. Ultimaker 3 detects and identifies the material on the reel holder and checks the correspondence of a filament and print core type being used

EEPROM print core chip  

 

 

The EEPROM chip in the print core memorizes the size and type of your nozzle, notifies you in case of misuse and, as a result, helps achieve higher print success rates

Simple Controls and Connectivity

USB port 

 

 

Enjoy standalone printing using a USB stick (16GB included)

Wi-Fi / LAN 

 

Send your print project quickly and easily to your Ultimaker 3 via Cura

Live camera  

 

Monitor every stage of your 3D printing project remotely by simply connecting to your Ultimaker 3’s Wi-Fi network. The result? Optimised workflow and exceptional control

Active leveling 

 

The capacitive sensor in the print head measures distances between the print bed and the nozzle, and the tilt angle is compensated by adjusting the z height in the first layers. The result? More accurate leveling and improved build plate adhesion

New refined design 

 

The Ultimaker 3 features a build plate that’s lighter and stiffer, which reduces vibrations and helps produce an unrivalled print quality. The removable glass plate makes it easy to access your prints

  •  

​Heated build plate

 

Thanks to the heated glass build plate, you can print using many different materials and with improved build plate adhesion

 

Feeder

 

Dual geared feeders: Geared feeders exert more force on the filament, and also eliminate heat exposure from the motor. Change your 3D printing materials with ease, select the correct pressure with a push on a button, and use the lever function to manually insert or remove a filament. More control means more successful, reliable and durable 3D print results, without compromise

Heated Build Plate

Industrial Grade Materials

 

 

​Ultimaker materials 

 

Print with a wide range of materials, including Nylon, PLA, ABS, CPE and PVA – with material portfolio due to be expanded with CPE+, PC and TPU 95A in the future. Combine two build materials for dual-colour 3D prints or achieve state-of-the-art complexity with build and water-soluble support material combinations (Nylon/PVA and PLA/PVA)

 

​NFC material scanner 

 

Your Ultimaker 3 identifies the material that is being loaded and checks the correspondence of the filament and print core type you are using. Coupled with our extensively tested preconfigured material profiles in Cura, the Ultimaker 3’s material recognition system ensures your 3D printer is set for the highest-quality results

​Open filament system

 

With our integrated ecosystem of reliable hardware, extensively tested materials and cutting-edge software, you are guaranteed the highest level results and optimised 3D printing experience. Yet, thanks to the Ultimaker open filament system, you have the freedom to try and test other types of existing filaments or manufacture your custom solution that would match your specific requirements

Ultimaker 3 Extended

Delivering accuracy and consistency

Specifications / Features( Download SpecSheet ) Technology:

Fused Filament FabricationPrint head

Dual nozzle, with a lifting mechanism on 2nd nozzle. (Easily swappable print cores)

Build volume

Single nozzle: 215(X) x 215(Y) x 300(Z) mm

Dual material: 197(X) x 215(Y) x 300(Z) mm *(refer to the note below on build volume)

 

Filament diameter: 2.85 mm

 

Layer resolution: 0.4 mm nozzle: 20 - 200 micron

 

Step accuracy: X 12.5, Y 12.5, Z 2.5 micron

 

Print head travel speed: 30 - 300 mm/s

 

Material flow rate: 0.40: up to 16 mm3/s

 

Build plate: Heated glass bed

 

Material types: PLA, PVA, ABS, CPE, Nylon

 

Nozzle diameter: 0.4mm

 

Nozzle temperature: 180 - 280 degree Celsius

Build plate temperature: 20 - 100 degree Celsius

 

Nozzle heat up time: < 2 min

 

Build plate heat up time: < 4 min (20 to 60 degree Celsius)

 

Average operation noise level: 50 dBA

 

Nozzle replacement: Easily swappable print cores

Filament system: Open, reel holder incl. guide for 2 spools of 750g filament. NFC system

 

                             to automatically detect material type

 

Connectivity: Wifi, ethernet, stand alone via USB-drive

 

Bed levelling: Active levelling

Camera: Built-in

*Note on build volume: The X and Y dimensions specified are representative of the maximum size you can print in the X and Y directions. It is not possible to print a cube of the specified build volume as you have to take into account clearances for the four retainer clips of the glass print bed. Other factors/ software settings including the use of prime tower, ooze shield, skirt, and brim will also reduce the overall build volume. Please kindly contact us if you have any questions regarding the build volume.

Materials / Consumables Included Your Ultimaker 3 Extended

1x Ultimaker Silver Metallic PLA Filament (350g)
1x Ultimaker PVA Filament (350g)2x Print Core AA (for build materials - PLA, Nylon, ABS, CPE)
1x Print Core BB (for support materials - PVA)
1x Magnalube-G (for Z axle lubrication) - Download Safety Data Sheet1x Unilube (for X and Y axles lubrication)
1x Glue Stick

Physical Dimensions Printer outer dimensions (incl. Bowden tube & spool holder)

49.3 x 33.8 x 68.8 cmPrinter outer dimensions (excl. Bowden tube & spool holder): 35.7 x 33.8 x 48.8 cm

 

Nett Weight: 11.3 kg

SoftwareSupplied software

Cura 2 - Official Ultimaker Software

 

Supported OS: Windows, Mac, Linux

 

File types: STL, OBJ, 3MF

 

File transfer: Print direct from Cura via network/ Stand alone printing via USB-drive

The Print Head

Dual extrusion: Combine build and water-soluble support materials to create complex mechanical parts and

 

                         intricate surfaces or choose to print with two colours. Ultimaker 3’s unique auto nozzle-lifting

 

                         system ensures a smooth, professional finish with every print.

Further Information

Ultimaker 3 User Manual

 

General Product Safety and Compliance Information

 

More information regarding Ultimaker 3 Extended can be found here.

Warranty12 Months**Print cores are consumable parts that will wear over time and are not covered under warranty. The frequency of replacement required for the print cores depends on the amount of usage and the types of filament used. Please kindly contact us if you require more information.

**CAUTION, THIS PRODUCT CONTAINS PARTS AND ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). ACCESSING THE PROTECTED ELECTRONICS MAY VOID YOUR WARRANTY**

3D Printer
Material
Company

Connect With US

All Right Reserved 2020. Pebblereka.

  • Facebook
  • Twitter
  • YouTube
  • Instagram